1st Stage-Polypropylene filter
High-Grade 1 micron high-capacity polypropylene sediment filter
-remove larger particles & suspended matter such as dirt, silt, rust, sand from water.
-Protects and extends the life of the membrane and system
-Recommend replace every 6 months, varies depend on the water source quality
-Standard Size 2-1/3″ x 10″
2nd Stage-GAC Activated Carbon
Remove of deep-seated particulate impurities,sludge,rust other suspended matter, color adsorption, odor, pesticides, detergents and other organic pollutants and tap water adding bleach to regulate taste, water mellowness, sweet, so water closer to nature. Recommend replace every 6 months, varies depend on the water source quality Standard Size 2-3/4″ x 10-1/4″
3rd Stage-CTO Coconut Shell Carbon Block Filter
Forceful remove pesticide residues in water, water pollution odor of ozone, chlorine removal of residual heavy metals, bacteria, sterilization rate if 99% Recommend replace every 16 months, varies depend on the water source quality Standard Size 2-3/4″ x 10″
4th Stage-Reverse Osmosis Membrane
RO membrane pore size is the hair of five millionths(0.001 microns) it can effectively remove calcium and magnesium, bacteria, organic, inorganic, metal ions and radioactive substances. Recommend replace every 4 years, varies depend on the water source quality Standard Size 2-1/5″ x 11-4/5 “
5th Stage-Inline GAC Coconut Shell Carbon Filter
T33 GAC Coconut Shell Carbon Filter removes any taste or odor the water may have picked up while sitting in the tank and For a sweeter taste for the water and Recommend replace every 2 years, varies depend on the water source quality Standard Size 2-1/3″ x 9-4/5″,
Water Storage Tank
3.2 Gallon Tank Work pressure: less than 0.4MPa Pressure Max:1.3MPa Flow:larger than 3L/min Dimension:15″ x 10″ NSF approved